Nothing more, nothing less · real PUF panels · real factory prices
Guide · Applications · today’s prices are on the live board

PUF Panel for Pharma and Food-Processing Units — Walls That Wash

PUF panel for pharma and food-processing partitions: the flat 50, 60 and 80 mm wall panels, the 1150 mm module, a worked partition run, and today's prices.

By Soumil Gupta · published 17 Oct 2026 · updated 30 Oct 2026 · EasyPuf
Reviewed by Pankaj Derewal, engineer, 10 years of PUF panel installation

Today’s factory price · as of
50 mm roof panel, 0.5 / 0.3 mm sheets: ₹ 1,298 per sqm — at the 3,000 sqm slab. PUF panels (roof and wall), every thickness and sheet: ₹ 939 to ₹ 1,799 per sqm. PUF slab (foam, no steel faces): ₹ 529 to ₹ 929 per sqm. Smaller orders cost more per sqm, slab by slab: see the live board.Per sqm · ex-factory Kathua · GST extra · freight on actuals · pay to book · every price on the live board

A PUF panel for pharma or food-processing work is a wall panel: flat on both faces, the same 0.5 mm sheet on each, on a 1150 mm module so that a corridor has as few joints as the geometry allows. Our 50, 60 and 80 mm wall panels are the ones that fit. Today the 60 mm wall panel with 0.5 / 0.5 mm sheets is ₹1,403 per sqm at the 3,000 sqm slab, the 50 mm ₹1,309 and the 80 mm ₹1,611, ex-factory Kathua, GST and freight extra. Every order size is on the live price board; specification: 60 mm wall panel specification.

PUF panel for pharma: what a process room asks of a wall

Three things. A face that can be washed and does not hold dirt: flat, painted steel. As few joints as possible, because every joint is a line to seal and a place for dirt to sit. And enough insulation to hold the room's temperature where the process needs it, which for a packing hall is a little and for a cold-chain corridor is more. The classification the room must meet, and the joint, coving and flush details that meet it, are the designer's; the panel supplies the face, the module and the foam.

Hygienic wall panel: the three thicknesses

LineWall 50 mmWall 60 mmWall 80 mm
Sheets0.5 / 0.5 mm nominal TCT, Galvalume AZ70/PPGLsamesame
CorePUF 40 kg/m³, 50 mm60 mm80 mm
Chargeable width1.15 m, 1150 mm modulesamesame
Faceflat both sides, RAL9002 Off-Whitesamesame
Coatingmulti-coat, 20 µ top + primer, 10 µ back, IS 15965 / ISO 16163samesame
Full 32 ft load (sqm)about 1,220about 1,020about 760
3,000 / 1,500 / 750 sqm, today (₹/sqm)₹1,309 / ₹1,329 / ₹1,349₹1,403 / ₹1,423 / ₹1,443₹1,611 / ₹1,631 / ₹1,651

Source: EasyPuf product pages. Per sqm, ex-factory Kathua, GST and freight extra, pay to book.

The 50 mm is the partition panel; the 60 mm the step up for a room that is held cool; the 80 mm the cold-chain wall.

The joint count

On a 1150 mm module a 46 m corridor wall is exactly 40 panels and 40 joints. A partition grid of internal rooms is set out to the module so that doors fall between whole panels. The joint form and its sealing are not on our pages; what the module fixes is how many there are.

Clean room panel partitions, worked

At today's prices. A processing block with 320 m of internal partition and perimeter wall, 4 m high, in 60 mm wall panel.

LineWorkingResult
Panels320 ÷ 1.15, rounded up279 panels, 4 m long
Area279 × 4 × 1.151,283.4 sqm
Slab reached750 – 1,499 sqm750 sqm trial
Rate, 60 mm, 0.5 / 0.5 mm₹1,443 per sqm
Panel value1,283.4 × rate₹18,51,946
Trucks4 m panels; about 1,020 sqm per full load at 32 ft lengthtwo; loading plan confirms

GST and freight per truck are separate lines. Adding 217 sqm of the same panel — one more room — lifts the order to the 1,500 sqm slab at ₹1,423 per sqm.

Food processing PUF panel: the terms

Ex-factory Kathua, cut to length, packed and loaded at the gate; GST and freight per truck extra. A slab is per panel type per order, so 60 mm partitions and 80 mm cold-room walls reach their slabs separately. Made to order; full payment books the slot; the earliest production date is a planned start, not a delivery promise.

Setting out a process block on the module

Partition grids are drawn to 1.15 m where the layout allows, so that doors and pass-throughs fall between whole panels and the number of cut panels is small. A room 6.9 m wide is exactly six panels; a room 7 m wide is six panels and a 10 cm strip, which is a joint and a cut for nothing. Ceilings over a suspended-ceiling void are roof panel or wall panel by the designer's choice and are a separate panel type for slab purposes.

Which thickness goes where

Three rooms, three answers, as the design typically sets them: a packing hall or corridor held near ambient, 50 mm; a room held cool for the product, 60 mm; a cold-chain store or blast area, 80 mm and above. The pages do not prescribe this; the designer does, from the room's temperature and use. What the buyer sees is the step in price: ₹94 per sqm from 50 to 60 mm and ₹208 from 60 to 80 mm at the 3,000 sqm slab today.

Frequently asked questions

Which PUF panel is used for pharma partitions?
A flat wall panel with the same sheet on both faces. Ours are the 50, 60 and 80 mm wall panels, 1.15 m wide on a 1150 mm module.

Is the PUF panel suitable for a classified clean room?
Our pages state the panel's face, module, core and coating; the room classification, joint sealing and coving are the designer's to specify and the installer's to achieve.

What is the clean room panel price per sqm?
Today the 60 mm wall panel with 0.5 / 0.5 mm sheets is ₹1,403 per sqm at the 3,000 sqm slab, ex-factory Kathua, GST and freight extra.

Can the wall panel be washed down?
The face is multi-coat pre-painted Galvalume, 20 µ on the face. Chemical resistance figures for particular cleaning regimes are not on our pages.


EasyPuf makes PUF sandwich panels at Kathua (J&K) and publishes its factory price per sqm in public at easypuf.com/prices — ex-factory, GST and freight extra, pay to book — with every day's prices kept on record at easypuf.com/prices/archive. EasyPuf is a Pronto initiative. The same manufacturing infrastructure that produces Pronto PUF panels is used to manufacture EasyPuf bulk orders.

More on applications

All guide articles · today’s factory prices