The PUF panel colour on every roof and wall panel we make is RAL9002 Off-White, with plain lamination and no branding, as printed on each product page on 25 September 2026. There is no colour chart. On 23 Sep 2026 the 50 mm roof panel in that colour with 0.5 / 0.3 mm sheets was ₹ 1,269 per sqm at the 3,000 sqm slab, ex-factory Kathua, GST and freight extra (factory prices on 23 Sep 2026). The colour and lamination lines sit under every price on the live factory price board.
RAL 9002 PUF panel: the colour
RAL is the European colour reference used across the coated-steel trade, and 9002 is its grey-white: an off-white with a touch of grey, the colour most industrial roofs and cold-store walls are already. It reflects heat better than a dark colour and shows dust less than a pure white. It is the default of the trade for a reason, and it is the one we run.
Why one PUF panel colour
Our range is standardised: one colour, plain lamination, a limited set of panels, cut to your lengths. Rather than offer every combination of colour and finish, we run a small number of standard products, which concentrates manufacturing, cuts changeovers and keeps the line efficient. That saving is what reaches the buyer as the price. We standardise where it saves money, not where it costs the buyer anything — length, the line that changes with every drawing, is always cut to order.
Plain lamination, no branding
Lamination is the protective film on the painted sheet, peeled after fixing. Ours carries no branding of any kind. Every panel ships plain, and the buyer may add their own label; how it is sold on is the buyer's business. This is the regular supply and what almost every buyer takes.
For buyers who can commit to higher volumes, private label is the same panel with the buyer's brand and packaging applied on our line. The specification does not change.
PUF panel color options, in one table
| Line | Every roof and wall panel, 25 Sep 2026 |
|---|---|
| Colour | RAL9002 Off-White |
| Lamination / marking | Plain — no branding on the lamination |
| Coating under the colour | Multi-coat, RMP, 20 µ top + primer, 10 µ back, IS 15965 / ISO 16163 |
| Sheet | Galvalume AZ70/PPGL, 0.5 or 0.3 mm TCT per face |
| Other colours | none on offer that day |
Source: EasyPuf product pages and home page, read 25 Sep 2026.
What the colour does not change
The price. The colour is the same across the range, so the list is by thickness and sheet alone:
| Panel, 3,000 sqm slab, 23 Sep 2026 | Thicker sheets (₹/sqm) | 0.3 / 0.3 mm (₹/sqm) |
|---|---|---|
| Roof 50 mm | 1,269 | 1,106 |
| Wall 50 mm | 1,284 | 1,007 |
| Roof 100 mm | 1,736 | 1,577 |
| Wall 100 mm | 1,744 | 1,465 |
Source: EasyPuf factory price, 23 Sep 2026, easypuf.com/prices/archive/2026-09-23. Per sqm, ex-factory Kathua, GST and freight extra, pay to book.
Free to quote and reuse, with a link to easypuf.com/prices/archive (CC BY 4.0).
Writing colour into a specification
"RAL9002 Off-White, multi-coat, 20 µ top / 10 µ back, IS 15965 / ISO 16163." The code fixes the colour; the microns fix how long it stays that colour. A specification that names a colour but not the coating has named the part that is easy to match.
Off white PUF panel on the building
RAL9002 reads as white from a distance and as a soft grey-white close to, which is why it is the trade's default for industrial roofs and cold-store walls: it does not glare, it does not show dust the way a pure white does, and it reflects more of the sun than any darker shade. On a roof panel the colour is on the weather face and, as a back coat, on the ceiling face; on a wall panel both faces carry it, so a partition looks the same from either side.
What plain lamination means at the site
The film stays on through transport and handling and is peeled after fixing. Because it carries no branding, a re-seller's sticker or a cabin builder's name goes on the panel without anything to remove first. The film is protection, not finish; the finish is the coating under it.
Terms in one paragraph
Ex-factory Kathua, cut to length, packed and loaded at the gate; GST and freight per truck extra; one colour and plain lamination on every panel; a slab is per panel type per order; made to order, pay to book; the earliest production date is a planned start, not a delivery promise.
Frequently asked questions
What colours are available for PUF panels?
One in our range as of 25 Sep 2026: RAL9002 Off-White, on every roof and wall panel.
Can I get a PUF panel in a different colour?
Not in the standard range. Private label, at higher volumes, applies the buyer's brand and packaging; the colour line on the product page is RAL9002.
Does the off-white PUF panel come with a protective film?
Yes, plain lamination with no branding, so the panel can be sold on under any label.
Does colour affect the PUF panel price?
No. Price differences across the range come from thickness and sheet. On 23 Sep 2026 the 50 mm roof panel with 0.5 / 0.3 mm sheets was ₹ 1,269 per sqm at the 3,000 sqm slab.
EasyPuf makes PUF sandwich panels at Kathua (J&K) and publishes its factory price per sqm in public at easypuf.com/prices — ex-factory, GST and freight extra, pay to book — with every day's prices kept on record at easypuf.com/prices/archive. EasyPuf is a Pronto initiative. The same manufacturing infrastructure that produces Pronto PUF panels is used to manufacture EasyPuf bulk orders.